Xref: utzoo comp.sys.ibm.pc:49873 comp.unix.xenix:11344
Path: utzoo!utgpu!news-server.csri.toronto.edu!helios.physics.utoronto.ca!ists!yunexus!rreiner
From: rreiner@yunexus.UUCP (Richard Reiner)
Newsgroups: comp.sys.ibm.pc,comp.unix.xenix
Subject: Re: Multiport Serial Boards...
Message-ID: <10567@yunexus.UUCP>
Date: 2 May 90 21:28:35 GMT
References: <2494@crash.cts.com>
Organization: York U. Computing Services
Lines: 14

jca@pnet01.cts.com (John C. Archambeau) writes:


>Maybe I should add an extra constraint that I neglected, the board has to
>support hardware flow control.  You need that if you're going to hang a US
>Robotics HST or Dual Standard HST and have things run smoothly.
>Only two that I know of that support hardware flow control are the Computone
>and Digiboard.  One soul in e-mail told me the Maxspeed does not support
>hardware flow control, ok, out goes that one.

The Intellicon-[48] boards from Connect Tech *do* support hardware
flow control.  I've used the 8's the HST modems without problems.

--richard