Path: utzoo!utgpu!news-server.csri.toronto.edu!clyde.concordia.ca!uunet!mcsun!ukc!acorn!moncam!emmo
From: emmo@moncam.co.uk (Dave Emmerson)
Newsgroups: comp.sys.ibm.pc
Subject: Re: Harddrive led won't stop
Summary: One possibility
Keywords: led
Message-ID: <642@marvin.moncam.co.uk>
Date: 5 May 90 00:44:23 GMT
References: <10090@sdcc6.ucsd.edu+
Organization: Monotype ADG, Cambridge, UK
Lines: 13

In article <10090@sdcc6.ucsd.edu+, cs163wbf@sdcc10.ucsd.edu (RICHARD WUN) writes:
+ I have a miniscribe 20Mb hard drive with the led on the drive not
+ stopping once it's starts booting.  When I turn on the power
+ everythnig is normal and the hard drive is booted when there isn't a
+ disk in the floppy drive, but then the light on the drive doesn't go
+ off after that.  The drive is reading and writing with no problems.
[deleted]

It could just be that you have it configured as a RADIAL system. If so,
you won't have any problems till you try to add a second drive, then
you may have to swap some jumpers around.

Dave E.