Path: utzoo!utgpu!news-server.csri.toronto.edu!mailrus!uwm.edu!zaphod.mps.ohio-state.edu!usc!sdsu!crash!pnet01!jca
From: jca@pnet01.cts.com (John C. Archambeau)
Newsgroups: comp.sys.ibm.pc
Subject: Rodime Drive...
Message-ID: <2523@crash.cts.com>
Date: 5 May 90 08:36:09 GMT
Sender: root@crash.cts.com
Organization: People-Net [pnet01], El Cajon CA
Lines: 21

I just inherited what appears to be a Rodime RO352 hard drive.  The problem is
that I don't know what the proper configuration is to set the thing to drive
select two and hang it off my 16-bit hard drive controller as drive 2.  I'm
certain it's a 20 Mb drive since the label on it says "Type 2" which implies
its parameters are identical to a Seagate ST225.  Ok, great, now what's the
proper jumper settings under the drive to hook the thing to my 386SX with
WA3-16 controller?  Any help will be appreciated.

BTW, I know it's an ST412/506 drive judging from the connections from the
drive to the controller.  Two edge connections that are keyed.
 
     // JCA

 /*
 **--------------------------------------------------------------------------*
 ** Flames  : /dev/null                     | Xenix is the ONLY thing
 ** ARPANET : crash!pnet01!jca@nosc.mil     | Microsoft did right.
 ** INTERNET: jca@pnet01.cts.com
 ** UUCP    : {nosc ucsd hplabs!hd-sdd}!crash!pnet01!jca
 **--------------------------------------------------------------------------*
 */