Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!usc!bbn.com!malis
From: malis@bbn.com (Andy Malis)
Newsgroups: comp.sys.laptops
Subject: Re: Z88 serial communications above 2400 baud
Message-ID: <55768@bbn.BBN.COM>
Date: 4 May 90 20:26:19 GMT
References: <FEDERICO.90May4160205@actisb.uucp>
Sender: news@bbn.com
Distribution: comp
Lines: 12

federico@actisb.uucp (Federico Heinz) writes:

>I have noticed some very strange behaviour using the RS232 port of the
>Z88.  When you receive data through the port at a baud rate higher
>than 2400 baud (that is, 9600 and up, since the Z88 doesn't support
>4800 baud), the port sort of "locks up". 

Using my Mac (in Versaterm), I sent some good-sized files down to
the Z88 (running VT52) at 9600 and 19,200 with no problems at all.
I did have XON-XOFF enabled at both ends.

Andy Malis <malis@bbn.com>    UUCP: {harvard,rutgers,uunet}!bbn!malis