Xref: utzoo comp.sys.nsc.32k:832 alt.sys.pc532:94
Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!usc!apple!vsi1!daver!bungi.com!news
From: vonb@iitmax.iit.edu (bob von borstel)
Newsgroups: comp.sys.nsc.32k,alt.sys.pc532
Subject: Gatewayed mail message
Message-ID: <9005042253.AA28616@iitmax.iit.edu>
Date: 4 May 90 22:53:13 GMT
Sender: news@daver.bungi.com
Distribution: comp
Lines: 9
Approved: news@daver.bungi.com

okay on the pga/plcc 32381 explanation.  The primary reason I was asking
about the 30mhz/25mhz 532 part, was that I have a couple of the 532
designer kits from National, and aside from some of the other parts that
aren't pertinent to this board, the 532 is a 30mhz part.

so....i assume driving the 30mhz 532 at 25 mhz is okay.
I know some ic designers (motorola) for example have minimum timing requirements
when you want to drive a fast chip slower (88k).  Don't have the specs on
the 532 driving.