Path: utzoo!utgpu!news-server.csri.toronto.edu!clyde.concordia.ca!uunet!mailrus!ncar!tank!gargoyle!ddsw1!olsa99!mike
From: mike@olsa99.UUCP (Mike Foo)
Newsgroups: sanet.unix.questions,comp.unix.questions
Subject: SCO UNIX and SCSI devices
Keywords: sco unix scsi
Message-ID: <2170@olsa99.UUCP>
Date: 30 Apr 90 12:42:46 GMT
Followup-To: poster
Organization: Olivetti Africa
Lines: 19


Has anyone out there tried to install several SCSI devices under SCO UNIX
3.2?

Apparently when one has to install 2 SCSI drives and a SCSI tape, the
second hard drive has to be installed AFTER the tape. Has anyone had the
opportunity to try this?

Can anyone explain the difference between the id no and the lun no?

Can SCSI devices be placed anywhere on the daisy chain? And do the
connectors have any privileges? ie those closer to the controller have
higher priority on the bus?

-- 
Michael Foo - Olivetti, Unix Software Support, Olivetti Africa (Pty) Ltd.,
/"""\ 15 Stiemens St, Braamfontein, Jhb, 2001 /// P O Box 4158, Jo-burg, 2000
|o.o| Tel: (+27) 11 339 9911 (9029) Fax: (+27) 11 339 7432 Tlx: 4-22002 SA
\_=_/ Uucp : { iconet!olgb1 | odatc0 } !olsa99!michael