Xref: utzoo comp.unix.i386:4724 comp.unix.xenix:11356 comp.terminals:2020
Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!samsung!usc!apple!snorkelwacker!bloom-beacon!eru!luth!sunic!mcsun!hp4nl!ctisbv!pim
From: pim@cti-software.nl (Pim Zandbergen)
Newsgroups: comp.unix.i386,comp.unix.xenix,comp.terminals
Subject: VP/ix on a Wyse 120/150
Message-ID: <1990May3.093518.9905@cti-software.nl>
Date: 3 May 90 09:35:18 GMT
Organization: CTI Software BV, The Hague, The Netherlands
Lines: 22

I vaguely remember that this question has been asked before,
but could not find it in my archives.

The question is whether a Wyse 120 (called the Wyse 150 outside of Europe)
should work exactly the same as a Wyse 60 in VP/ix or that
a different /usr/vpix/term file is needed.

At first the Wyse 120 would hang as soon as VP/ix is started,
but this turned out to be caused by the Telebit modems connecting
the Wyse to the host. After disabling XON/XOFF flow control in the modems
everything works.   

But after quitting VP/ix, the terminal still is in scancode mode.
It will not even let me change this manually, because it will
not let me enter the setup.

I am running VP/ix 1.1.1 on ISC 386/ix 2.0.2
-- 
Pim Zandbergen                             domain : pim@cti-software.nl
CTI Software BV                            uucp   : uunet!mcsun!hp4nl!ctisbv!pim
Laan Copes van Cattenburch 70              phone  : +31 70 3542302
2585 GD The Hague, The Netherlands         fax    : +31 70 3512837