Xref: utzoo comp.sys.ibm.pc:49940 comp.unix.xenix:11357
Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!uunet!csinc!rpeglar
From: rpeglar@csinc.UUCP (Rob Peglar)
Newsgroups: comp.sys.ibm.pc,comp.unix.xenix
Subject: Re: Multiport Serial Boards...
Summary: Comtrol.
Message-ID: <203@csinc.UUCP>
Date: 3 May 90 14:59:35 GMT
References: <2494@crash.cts.com>
Followup-To: poster
Organization: Control Systems, Inc., St. Paul MN
Lines: 21

> 
> Maybe I should add an extra constraint that I neglected, the board has to
> support hardware flow control.  You need that if you're going to hang a US
> Robotics HST or Dual Standard HST and have things run smoothly.
> 
> Only two that I know of that support hardware flow control are the Computone
> and Digiboard.  One soul in e-mail told me the Maxspeed does not support
> hardware flow control, ok, out goes that one.

Comtrol has had hardware flow control for years, on the Hostess and
Ultra series of controllers.

More info, e-mail here.

Thanks,
Rob
-- 
Rob Peglar	Control Systems, Inc.	2675 Patton Rd., St. Paul MN 55113
...uunet!csinc!rpeglar		612-631-7800

The posting above does not necessarily represent the policies of my employer.