Xref: utzoo comp.periphs.scsi:436 comp.sys.ibm.pc:50341 comp.unix.xenix:11467 comp.unix.i386:4888
Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!usc!apple!well!feustel
From: feustel@well.sf.ca.us (David Alan Feustel)
Newsgroups: comp.periphs.scsi,comp.sys.ibm.pc,comp.unix.xenix,comp.unix.i386
Subject: Re: Adaptec 154xB SCSI host adapter (was: Re: WD SCSI Controller)
Message-ID: <17908@well.sf.ca.us>
Date: 9 May 90 23:46:28 GMT
References: <1922@lakesys.lakesys.com> <3906@thebes.Thalatta.COM> <1990May5.203455.16809@clmqt.marquette.Mi.US> <1990May6.135921.13129@cti-software.nl> <1990May7.211407.6954@ico.isc.com>
Lines: 10

I have two Adaptek 1542a controllers connected to a Connor 100meg SCSI
drive. Both controllers at bootup see the Conner drive, but only the
controller closest to the Conner drive is able to successfully read
the drive. I tried changing the cable but that didn't help. The cables
I've used may be too long. Does anyone know the maximum permissable
length for single-ended SCSI cabled bus?
-- 
Phone:	 (home) 219-482-9631 
E-mail:	feustel@well.sf.ca.us	{ucbvax,apple,hplabs,pacbell}!well!feustel	
USMAIL: Dave Feustel, 1930 Curdes Ave, Fort Wayne, IN 46805