Path: utzoo!attcan!uunet!van-bc!skl
From: skl@van-bc.UUCP (Samuel Lam)
Newsgroups: comp.binaries.ibm.pc.d
Subject: Re: Re: v06i186: heditor, hex file editor
Summary: Specifying a file name on the command line didn't help much.
Keywords: heditor
Message-ID: <452@van-bc.UUCP>
Date: 1 Jun 90 04:55:47 GMT
References: <440@van-bc.UUCP> <12630033@hpcupt1.HP.COM>
Reply-To: Samuel Lam <skl@wimsey.bc.ca>
Organization: Balliffe Intersystem, Vancouver, B.C., Canada
Lines: 21

In article <12630033@hpcupt1.HP.COM>, swh@hpcupt1.HP.COM (Steve Harrold) wrote:
>>... I get a "divide by 0" error from the run-time library as
>>soon as the program starts...
>...
>It seems that you have to provide a filename on the command line.  When I
>do that, the editor starts up and displays the named file.

When I ran it with a file name on the command line, it will display the
first screen, but it *still* exits with a "dividsion by zero" error after
that.

(This is happening on a 4.77 MHz DOS 2.1 PC with no CONFIG.SYS nor
AUTOEXEC.BAT, and thus no TSR's loaded.)

Any other ideas?

Thanks very much for your time.

...Sam
-- 
Internet: <skl@wimsey.bc.ca>	UUCP: {van-bc,ubc-cs,uunet}!wimsey.bc.ca!skl