Xref: utzoo comp.misc:9063 comp.terminals:2061 comp.sys.ibm.pc:51306 comp.sys.misc:2834
Path: utzoo!utgpu!news-server.csri.toronto.edu!rutgers!ucsd!hub.ucsb.edu!6600phnx
From: 6600phnx@ucsbuxa.ucsb.edu (Phoenix / Fig)
Newsgroups: comp.misc,comp.terminals,comp.sys.ibm.pc,comp.sys.misc
Subject: Re: Looking for 132-col VT100/220 emulator
Message-ID: <5514@hub.ucsb.edu>
Date: 27 May 90 01:53:24 GMT
References: <747@idsssd.UUCP> <944@tnessd.UUCP>
Sender: news@hub.ucsb.edu
Reply-To: 6600phnx@ucsbuxa.ucsb.edu
Organization: Ghostwheel Redevelopment Agency
Lines: 17
In-reply-to: admdrm@tnessd.UUCP's message of 25 May 90 20:23:17 GMT


In case anybody didn't notice I was pleaently suprised one day when I
used my VGA (orchid) in a alternate text mode, being 132X44, and found
out that bith Qmodem and Telix conformed to the display width
automatically, kind of nice.  Since then I don't use these modes much
but of all the modes that I have they all work.  BTW I noticed that some
ANSI drivers tend to corrupt the display so I keep ansi off using a
PCMag progam called ANSI to install and deinstall ANSI as needed.  So,
try puting your card in and extended mode and running your modem
program.

--
 ..Mike Figueroa..........................        _______________________
 . 6600phnx@ucsbuxa.ucsb.edu  (Internet) .       /        //     /
 .         @ucsbuxa.bitnet    (Bitnet)   .      /----    //     /   __
 .........................................     /        //     /     / 
   "And Then There Were None . . ."           /      ------    ------