Path: utzoo!utgpu!news-server.csri.toronto.edu!rutgers!usc!samsung!uunet!mcsun!inesc!unl!unl!jpc From: jpc@fctunl.rccn.pt (Jose Pina Coelho) Newsgroups: comp.misc Subject: Re: How to remove PS/2 Password? Message-ID: Date: 30 May 90 14:23:12 GMT References: <30215@cup.portal.com> Sender: news@fctunl.rccn.pt (USENET News System) Organization: Universidade Nova de Lisboa -- Lisbon, Portugal Lines: 16 In-Reply-To: ghost@cup.portal.com's message of 26 May 90 03:23:10 GMT In article <30215@cup.portal.com> ghost@cup.portal.com (Robert Bruce Ferrell) writes: > password. I thought I could "blow" the password by removing a > board (thus corrupting the system config ram) but that didn't > work (the good news is I could put the board back in and at Yes, you where on the right way. Just didn't wait time enough. RT[F]M is the way. I discovered that you have to remove the battery for at least 30 minutes. -- Jose Pina Coelho | BITNET/Internet: jpc@fctunl.rccn.pt Rua Jau N 1, 2 Dto | UUCP: jpc@unl.uucp 1300 Lisboa, PORTUGAL | ARPA: jpc%hara.fctunl.rccn.pt@mitvma.mit.edu Home phone: (+351) (1) 640767 - If all men were brothers, would you let one marry your sister ?