Xref: utzoo comp.sys.m68k:1678 comp.os.misc:1185
Path: utzoo!attcan!uunet!snorkelwacker!usc!samsung!emory!mephisto!ncsuvx!news
From: miler@cscadm.ncsu.edu (George Miler)
Newsgroups: comp.sys.m68k,comp.os.misc
Subject: SAGE IV DOCUMENTATION NEEDED
Message-ID: <1990May25.005814.15483@ncsuvx.ncsu.edu>
Date: 25 May 90 00:58:14 GMT
Reply-To: miler@cscadm.ncsu.edu (George Miler)
Lines: 22


     I am currently working on a project involving hardware level
     programming on a SAGE IV minicomputer.  I have several manuals, that
     describe where the hardware addresses are located, but nothing to the
     effect telling how to program them.  Currently I am attempting to
     program the floppy disk controller and have the spec sheets on the
     controller, but not how it is wired to the microprocessor.  What I need
     is any leads as to where I may find such information.  ROM listings and
     BIOS listings would help troumendously, as would documentation on the
     SAGE <-> device interfaces.  I also need to know how interrupts from
     external devices are wired to the 68000 autovectors.  Any help would be
     greatly appericated!

						George Miler
						miler@cscadm.ncsu.edu



=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
George B. Miler                           North Carolina State University
miler@cscadm.ncsu.edu           {decvax, gatech}!mcnc!ncsuvx!cscadm!miler
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=