Xref: utzoo comp.sys.sun:9730 comp.periphs.scsi:555
Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!rice!sun-spots-request
From: eplrx7!mcneill@uunet.uu.net (Keith McNeill)
Newsgroups: comp.sys.sun,comp.periphs.scsi
Subject: jumper settings for maxtor XT-4380E
Keywords: Hardware
Message-ID: <8351@brazos.Rice.edu>
Date: 30 May 90 14:32:37 GMT
Sender: root@rice.edu
Followup-To: comp.sys.sun
Organization: Sun-Spots
Lines: 17
Approved: Sun-Spots@rice.edu
X-Sun-Spots-Digest: Volume 9, Issue 192, message 17

Anybody know the jumper settings for a Maxtor xt-4380e disk drive?  The
drive will be hooked up to a 3/260 with the old ESDI-SCSI controller (si).
The machine runs 3.5.

Does anybody know of an archive of such things?

[[Ed's Note: working on it - that and the sun-sounds directory :(. I've
got lots of entries for disk partition and setup, I just need to organize
them and put them where y'all can get at them. -bdg]]

Thanks,
Keith

    Keith D. McNeill              |    E.I. du Pont de Nemours & Co.
    eplrx7!mcneill@uunet.uu.net   |    Engineering Physics Laboratory
    (302) 695-9353/7395           |    P.O. Box 80357
                                  |    Wilmington, Delaware 19880-0357