Path: utzoo!attcan!uunet!mcsun!cernvax!chx400!fatcat!acadch!impch!sosaria!wizard
From: wizard@sosaria.imp.com (Chris Brand)
Newsgroups: comp.sys.amiga
Subject: Re: UUCP 1.03D and HST 14400
Message-ID: <4374.AA4374@sosaria>
Date: 30 May 90 23:03:52 GMT
Followup-To: comp.sys.amiga
Distribution: comp
Organization: Sosaria Realm Berne, Switzerland
Lines: 27

In article <02592.AA02592@telepro.UUCP> oliphant@telepro.UUCP (Mike Oliphant) says:
> I'm having difficulties getting Matt Dillon's UUCP 1.03D to work with an
> HST 14400 modem.  The modem calls out just fine, but doesn't connect properly.
> Note that I am not trying to connect a high speed - the problems are occurring
> at 1200 and 2400 baud.  Has anyone managed to get an HST to work with this
> software?

I've had the same problems some time ago. My old Supra worked fine, and my
HST didn't. It depends on the modem of your host. Mine had a Tahihao or
whatever they're called and this modem was more or less incompatible with
my HST. I solved the problem with re-writing part of uucico. Try to add
some lines that slow uucico down while connecting (NOT while transmitting
:-). Somehow my HST sent the connect data (name, pw and so on) too fast for
the other modem. By adding some delay it worked.

I also had to add a working break-sending-support, but note that all this
was with a very old version of AmigaUUCP. Since I had never any problems
with AmigaUUCP 1.03 or 1.05 I suspect it must be your host's modem. Try to
find another site.


--
------------------------------------
Chris Brand - wizard@sosaria.imp.com
"Justice is the possession and doing 
of what one is entitled to" - Platon
------------------------------------