Path: utzoo!attcan!uunet!lll-winken!decwrl!shlump.nac.dec.com!wjg.enet.dec.com!guineau
From: guineau@wjg.enet.dec.com
Newsgroups: comp.sys.amiga.hardware
Subject: A2090(a) and GVP hard card on A2500
Message-ID: <12004@shlump.nac.dec.com>
Date: 29 May 90 12:44:43 GMT
Sender: newsdaemon@shlump.nac.dec.com
Reply-To: guineau@wjg.enet.dec.com
Organization: Digital Equipment Corporation, Marlboro, MA
Lines: 14

I recently added a GVP hard card SCSI controller to my A2500. I ran into a 
strange problem: When I left the 2090 in it's original slot (Zorro slot 1)
and added the GVP to another free slot (Zorro slot 3) The system would not
boot. The screen just cycled from light to dark grey. If I reverse the
order of the modules, it seems to work fine.

Anyone have an idea as to why this happens? Is it a known problem?  I haven't
called GVP or C= support yet. 


---
W. John Guineau   			guineau@wjg.enet.dec.com
Digital Equipment Corporation
Marlboro MA. 01752