Path: utzoo!censor!geac!torsqnt!news-server.csri.toronto.edu!clyde.concordia.ca!uunet!aplcen!uakari.primate.wisc.edu!sdd.hp.com!ucsd!usc!snorkelwacker!bloom-beacon!eru!luth!sunic!tut!mt87692 From: mt87692@tut.fi (Mikko Tsokkinen) Newsgroups: comp.sys.amiga.tech Subject: Re: More assembly questions Message-ID: Date: 29 May 90 15:11:33 GMT References: <1990May17.072036.11335@mintaka.lcs.mit.edu> <23257@uflorida.cis.uf <265377fd-662.2comp.sys.amiga.tech-1@tronsbox.UUCP> <9074@rouge.usl.edu> <11891@cbmvax.commodore.com> Sender: News@tut.fi Organization: Tampere University of Technology Lines: 19 In-reply-to: jesup@cbmvax.commodore.com's message of 29 May 90 06:31:01 GMT Yo! The very best assembler books for amiga in my opinion are orginal Motorola processor books :-) They are the only books I have ever seen with right clock cycles for example. But if you don't know much about amiga assembly programming buy (or lend, take a look) for example Devpac2 and check out what information it gives you before buying any other books. BTW without Harware Reference Manual you will have big trouble with blitter, copper and bitplanes. If you want to make utilities (I find it boring but it's great that some people makes 'em :-) you almost certainly have to buy RKM's and in most cases DOS manual (DOS Manual BTW has some info on assemlers (ASM& ALINK)) too. Sounds lot of buying and it is! MITT -- Mikko "Assembler rules OK!" Tsokkinen Internet mt87692@tut.fi : UUCP tut!mt87692 : Bitnet mt87692@fintut