Xref: utzoo comp.sources.wanted:11904 comp.sys.att:9672 unix-pc.general:5548
Path: utzoo!yunexus!ists!helios.physics.utoronto.ca!news-server.csri.toronto.edu!mailrus!uunet!tellab5!mcdchg!att!cuuxb!cuuxun!jhunix!andy
From: andy@jhunix.HCF.JHU.EDU (Andy S Poling)
Newsgroups: comp.sources.wanted,comp.sys.att,unix-pc.general
Subject: Re: Wanted: software to do backups/restores via serial port
Summary: remsh(1)
Message-ID: <5390@jhunix.HCF.JHU.EDU>
Date: 29 May 90 04:10:34 GMT
Article-I.D.: jhunix.5390
References: <1990May13.001234.23763@shade.ann-arbor.mi.us> <29873@cup.portal.com>
Reply-To: andy@jhunix.UUCP (Andy S Poling)
Followup-To: unix-pc.general
Organization: The Johns Hopkins University - HCF
Lines: 40

In article <29873@cup.portal.com> thad@cup.portal.com (Thad P Floryan) writes:
>steveb@shade.ann-arbor.mi.us (Steve Barber) in
><1990May13.001234.23763@shade.ann-arbor.mi.us> writes:
>
>	Has anyone written any UNIX software to do system backups through a
>	serial port to another computer?  I have an AT&T 3B1 without a tape
>	drive that I'd like to back up to a Sun's disk, and put it on tape
>	from there. 
[...]
>	(I wish SLIP existed on the 3B1...)
>
[...]
>Considering the scarcity of the tape backup subsystem for the UNIXPC, it
>seems to me the best course of action would be to acquire one of the WIB/3B
>Ethernet cards that Bob Slaski is offering at $300; to that you add about
>another $300 for an AUI cable, a ThinNet transceiver, and whatever additional
>RG-58 coax you need ... to connect your 3B1 direct to the SUN.
>
>With the networking subroutines supplied with the WIN/3B (and the assumed
>counterparts on the SUN system), you could conjure up a front-end (and a
>corresponding back-end) to pipe your 3B1's backup thru cpio and through the
>new program, over the net, and even, if you choose, directly to the tape
>drive on the SUN system.  You'd do the opposite for a restore operation.

This is how I back up my 3b1 w/ 40M drive (and ethernet card) - I use tar
(though I suppose cpio would work similiarly).  I pipe the output of tar
into a remsh-ed dd on a networked Ultrix box.  Backs up the entire disk to
the Ultrix box's tape drive in less then 1/2 hour without my supervision.

The only gotcha is that you have to restore not only the foundation set, but
also the WIN3B TCP/IP package before you can restore.  I figure that beats
the hell outta using 100+ floppies.

-Andy

--
Andy Poling                              Internet: andy@gollum.hcf.jhu.edu
Network Services Group                   Bitnet: ANDY@JHUNIX
Homewood Academic Computing              Voice: (301)338-8096    
Johns Hopkins University                 UUCP: uunet!mimsy!aplcen!jhunix!andy