Path: utzoo!yunexus!ists!helios.physics.utoronto.ca!news-server.csri.toronto.edu!cs.utexas.edu!uunet!aplcen!anagld!ethan
From: ethan@anagld.UUCP (Ethan Lish)
Newsgroups: comp.sys.att
Subject: AT&T with SNA Link
Keywords: AT&T SNA Modem
Message-ID: <944@anagld.UUCP>
Date: 29 May 90 16:16:55 GMT
Article-I.D.: anagld.944
Organization: CMSI
Lines: 29



Greetings -

	I am currently having a problem with my SNA/Link
on my AT&T 3B2/500 connected remotely to a IBM Host, via a 
dial up line using a Racal-Milgo RMD 3221 modem. 

	What seems to occur is:

	1) The session is begin with a UN*X command line statement.
	2) The modem dials the line
	3) Before the modem completes the link, the SNA software
		begins data transmission, causing the modem to error.

	AT&T points at Racal-Milgo, Racal-Milgo points a AT&T...
I don't have time for this finger pointing.. Who can recommend a
modem ( 9600, sync, Dial-On-DTR, V.32 ) that is *known* to work in 
this configuration.

	Any Ideas ?

			- Ethan

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
Mr. Ethan A. Lish              Credit Management Solutions, Inc., 
(800) 777-2674                 5950 Symphony Woods Road Suite 301
uunet!anagld!ethan             Columbia, Maryland 21044
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=