Path: utzoo!attcan!uunet!mcsun!inria!imag!bordier
From: bordier@imag.imag.fr (Jerome Bordier)
Newsgroups: comp.sys.mac.programmer
Subject: Re: Lightspeed C 3.0 & 1 MEGA Bytes RAM
Message-ID: <10298@imag.imag.fr>
Date: 1 Jun 90 16:20:30 GMT
References: <10222@imag.imag.fr>
Reply-To: bordier@imag.fr (Jerome Bordier)
Organization: IMAG, University of Grenoble, France
Lines: 20

Here is an answer that solves the problem:
   Two things:
1) You must be running multifinder.
2) To get the debugger to work w/ only 1M, you are going to have to quit out
of the finder first.  You need to make an FKEY w/ the contents A9F4.  I think
this is the exit to shell instruction. Launch LSC, go back to the finder and
invoke the new FKEY.  This quits the Finder. Now Run the program with
Use Debugger checked.  When you are all finished programming, just quite
out of LSC.  This will relaunch the Finder.
(by Melissa A. Hines:  Hines@Portia.Stanford.Edu)

N.B. Before launching LSC, modify "Application Memory Size" field to about 400K
in "Get info" dialog.


-- 
Jerome BORDIER 	Laboratoire de Structures Discretes et de Didactique
                IMAG B.P. 53 X  38041 GRENOBLE Cedex   FRANCE
TEL: (33) 76 51 45 53  FAX: (33) 76 51 45 55
INTERNET: bordier@imag.Fr       UUCP: bordier@imag (uunet.uu.net!imag!bordier)