Path: utzoo!yunexus!ists!helios.physics.utoronto.ca!news-server.csri.toronto.edu!mailrus!cs.utexas.edu!rice!sun-spots-request
From: rlee@digigw.lab.nanko.digital.co.jp (Robert Lee)
Newsgroups: comp.sys.sun
Subject: Summary on Powering Down Machines
Keywords: Miscellaneous
Message-ID: <8239@brazos.Rice.edu>
Date: 29 May 90 09:03:50 GMT
Article-I.D.: brazos.8239
Sender: root@rice.edu
Organization: Sun-Spots
Lines: 43
Approved: Sun-Spots@rice.edu
X-Refs:  Original: v9n167, Related: v9n21 v9n50 v9n59
X-Sun-Spots-Digest: Volume 9, Issue 186, message 4

Thanks to everyone who responded to my original posting on powering
machines off and on everyday.  The responses were the type I was looking
for and helps me out alot.  Here is a short summary:

- with 1 exception, all the respondents left their SS1s and servers
  running 24hrs/day.
- the one person who turned off the machines each day, has had NO
  problems.  
- effectively, almost everyone said that it is better to keep the
  equipment at a constant temperature.  Here is an excerpt from
  lehners@uniol:

> The technical reason are also clear to me: the electrical, mechanical
> und temperature stress is really bad when switching on and off all the
> days. The peak currents at power on are real high (aprox. 5 times the
> current in normal mode). Also the temperature stress and the resulting
> mechanical stress is bad for the machines. Hard disk drives are really
> in stress when accellerating to the operating speed.

    - in addition, bob@kahala.soest.hawaii.edu said:

> ... Machines that are turned off and
> on every day definitely suffer hardware problems more often.
> This is particularly noticeably where humidity is high
> (leaving machines off at night can cause small amounts
> of moisture to condense, which leads to corrosion of
> contacts).

    - pallen@atc.boeing.com made a good point which is worth mentioning:

> Suns are designed for continuous operation.  We have all our machines on
> Sun maintenance and run them 24 hours a day.  The only moving part that
> seems to wear out is cooling fans.  They last a year or two and then either
> stop turning or start making noise.  Fans should be checked periodically.
> The other things that go wrong, like monitors and disks, would probably
> have more problems if the machines were power-cycled daily.  But then I
> don't have any hard data to back up that opinion.

- and finally thanks to p.mellor@uk.ac.city for his informative readnews
  article.  I will go looking in the archive for old Sunspots issues.

Robert
Internet: rlee@digital.co.jp