Path: utzoo!yunexus!ists!helios.physics.utoronto.ca!news-server.csri.toronto.edu!mailrus!cs.utexas.edu!rice!sun-spots-request
From: hafner@ordin.cs.wisc.edu (Brian J. Hafner)
Newsgroups: comp.sys.sun
Subject: Re: PROM Revision
Keywords: SunOS
Message-ID: <8243@brazos.Rice.edu>
Date: 29 May 90 01:42:18 GMT
Article-I.D.: brazos.8243
Sender: root@rice.edu
Organization: Sun-Spots
Lines: 17
Approved: Sun-Spots@rice.edu
X-Refs:  Original: v9n183
X-Sun-Spots-Digest: Volume 9, Issue 188, message 1

In article <8215@brazos.Rice.edu> patel@cvlsun1.ece.drexel.edu (Patel Maqbool 387-1784) writes:
>
>We just got our SunOS 4.1 release. The release manual says that the prom
>revison on the Sun 4/260 and the Sun 4/110 has to be at least 2.x. However
>we have rev 1.3 on our Sun 4/260 and 1.8 on our Sun 4/110. Can we still
>load 4.1? If not, why?

I recently upgraded a 4/110 to SunOS 4.1.  The machine had boot PROM rev
1.8.  Although the manuals indicated that boot PROM 2.8 was required, I
had NO troubles booting the tape with the older PROM.  I also called SUN,
and the engineer I talked to was surprised that I was able to boot off of
the 4.1 release tape.  Later, I ordered the boot PROM rev 3.0 upgrade.

Brian J. Hafner
Computer Sciences Department
University of Wisconsin - Madison
hafner@cs.wisc.edu