Path: utzoo!attcan!uunet!mitel!sce!cognos!alzabo!tigris!glee
From: glee@tigris.uucp (Godfrey Lee)
Newsgroups: comp.unix.xenix
Subject: Re: Resetting a dialin/dialout modem
Message-ID: <1990May13.031726.644@tigris.uucp>
Date: 13 May 90 03:17:26 GMT
References: <1990May9.171830.17486@bluemtn.uucp>
Reply-To: glee@tigris.UUCP (Godfrey Lee)
Organization: Godfrey Lee
Lines: 49

In article <1990May9.171830.17486@bluemtn.uucp> perry@bluemtn.uucp (Perry Minyard (3MTA3)) writes:
>Our system is running SCO Xenix 2.3.2, with a Hayes modem off COM1:
>or {tty1a,tty1A}.

I am doing the same thing and I cannot get the modem to turn Auto-Answer back
on.  It doesn't seem to pay attention to the Dialers line with the "&".

Any help would be much appreciated.

Here are the relevant pieces:

-------------
/etc/ttys
-------------
13tty2A


-------------
/etc/gettydefs
-------------
1 # B300  HUPCL OPOST CR1 NL1 #
	B300 CS8 SANE HUPCL TAB3 IXANY #\r\n@!login: # 3

2 # B1200 HUPCL OPOST CR1 ECHOE NL1 #
	B1200 CS8 SANE HUPCL TAB3 ECHOE IXANY #\r\n@!login: # 1

3 # B2400  HUPCL OPOST CR1 ECHOE NL1 #
	B2400 CS8 SANE HUPCL TAB3 ECHOE IXANY #\r\n@!login: # 2

-------------
/usr/lib/uucp/Devices
-------------
ACU tty2a - 2400 hayes2400
ACU tty2a - 1200 hayes2400
ACU tty2a - 300 hayes2400
ACU tty2A - 2400 hayes2400
ACU tty2A - 1200 hayes2400
ACU tty2A - 300 hayes2400

-------------
/usr/lib/uucp/Dialers
-------------
hayes2400 =,-,	"" ATQ0E0T&D2&C1S0=0X4S2=043\r\c OK\r ATDT\T\r\c Speed
&hayes2400 =,-,	"" +++\dATHQ0E0T&D3&C1S0=3X4S2=128\r\c OK\r ATQ1\r\c

-------------------------------------------
-- 
Godfrey Lee
cognos!alzabo!tigris!glee