Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!mailrus!uunet!mcsun!ukc!slxsys!ibmpcug!robobar!steve
From: steve@robobar.co.uk (Steve Bleazard)
Newsgroups: comp.unix.xenix
Subject: Re: Xenix 2.3.2; what's wrong with /usr/lib/term/mkterm.o ???
Keywords: nroff troff term mkterm maketerm
Message-ID: <1990Jun1.065523.4036@robobar.co.uk>
Date: 1 Jun 90 06:55:23 GMT
References: <539@srwic.UUCP> <1990May25.174300.3092@dasys1.uucp>
Organization: Robobar Ltd., Perivale, Middx., ENGLAND.
Lines: 37

In article <1990May25.174300.3092@dasys1.uucp> jpr@dasys1.UUCP (Jean-Pierre Radley) writes:
>In article <539@srwic.UUCP> sralston@srwic.UUCP (Steve Ralston) writes:
>>I am trying to build a new /usr/lib/term file for use with nroff/troff.
>>As root, I cd to /usr/lib/term and run make with the following results:
>>
>>|	make -b TAB=tabuser mkterm
>>|	cc -O -c tabuser.c
>>|tabuser.c
>>|	cc -o mkterm mkterm.o tabuser.o
>>|mkterm.o(mkterm.c) : fatal error: mkterm.o : segment defined both 16- & 32-bit
>>|
>>| pos: 79 Record type: 98
>>|*** Error code 2
>>|
>>|Stop.
>>
>>Since the mkterm.o file is supplied with SCO Xenix (without source) there's
>>not much I can do about it.  Anybody else ever run into this or have any
>>clues as to what the problem and/or solution is?
>
>Yup. I've seen it too, and got pretty frustrated.
>
>I was going to try to contact SCO about it, but I think I moved on to
>other things and forgot about it.
>
If you add the line

CFLAGS	= -M0e

To the makefile in the /usr/lib/term directory everything will work fine.

Steve
-- 
Steve.Bleazard@RoboBar.Co.Uk        | Phone:  +44 81 991 1142 x153
Snr Software Engineer, Robobar Ltd. | Fax:    +44 81 998 8343 (G3)
22 Wadsworth Road, Perivale.        |
Middx., UB6 7JD ENGLAND.            | ...!ukc!robobar!steve