Path: utzoo!attcan!uunet!mailrus!uwm.edu!cs.utexas.edu!oakhill!dover!mcdphx!mcdchg!tellab5!wheaton!water From: water@wheaton.UUCP (Paul Waterman) Newsgroups: comp.binaries.ibm.pc.d Subject: Re: Re: Telemate (Was Procomm/Telix) Summary: Procomm Plus doesn't have VT100?!?! Right. Keywords: PROCOMM, TELIX, VT100, VT102 Message-ID: <2078@wheaton.UUCP> Date: 7 Jun 90 09:14:25 GMT References: <2206@laura.UUCP> <1990Jun5.134457.25492@cbnewsj.att.com> Reply-To: water@wheaton.UUCP (Paul Waterman) Distribution: na Organization: Wheaton College, IL Lines: 22 In article <1990Jun5.134457.25492@cbnewsj.att.com> felixc@cbnewsj.att.com (felix.cabral) writes: >I have Procomm+ 1b or b1 I forget. In either case its the one you buy at a >shop not the shareware version. I've been hoping to get vt100 emulation on >this guy for some time now. It does not support vt100 by default. Is there >a patch available that will add vt100 to my copy? Have you tried looking at the available terminal emulations available? Yes, it is true that PCOM+ doesn't support "vt100," but it does support "vt102," which is really the same thing. DEC went through a series of terminals very quickly, starting with the vt100, progressing to vt101, and then going to vt102. The vt102 command set is a superset of vt100, so if you simply set your terminal emulation to vt102 it should understand any vt100 commands, and yes, as far as I'm concerned, the PCOM+ vt102 emulator is the absolute best that I've seen. - Paul -- .------------------------------------------------. Paul Waterman | But I thought you said STRAITjackets and ties! | water@wheaton.UUCP `------------------------------------------------' voice: (708) 260-5889