Xref: utzoo comp.mail.uucp:4371 alt.bbs:2158
Path: utzoo!utgpu!news-server.csri.toronto.edu!mailrus!cs.utexas.edu!uunet!mcsun!hp4nl!mhres!vhy
From: vhy@mh_co2.mh.nl (Jean-Pierre verheij,GP-5.2.17,418,)
Newsgroups: comp.mail.uucp,alt.bbs
Subject: Re: X00.SYS in FSUUCP - how does one configure it
Message-ID: <4831@mhres.mh.nl>
Date: 8 Jun 90 06:19:44 GMT
References: <1990Jun7.145132.8488@llustig.uucp>
Sender: news@mhres.mh.nl
Lines: 21

From article <1990Jun7.145132.8488@llustig.uucp>, by turner@llustig.uucp (D'arc Angel):
> The docs for FSUUCP say read the docs for x00.sys to see how to
> configure it and of course batteries are not included. I am running
> a telebit modem at 19200 on com port 2. any help on what the
> parameters to x00.sys should be would be GREATLY appreciated.

I'm using x00.sys either, and i have no problems with the following setup in
your config.sys.

DEVICE=X00.SYS E 1

Als you can read in the x00 doc's the "E" means that you don't want the
commercial message when starting up. The "1" means that you are using 2 com
ports (default is 1 com port = number 0). I think that this is the answer that
you are waiting for.

Greetings, Jean-Pierre.

Jean-Pierre Verheij                           vhy@mh.nl via internet backbones
Multihouse Automatisering B.V.		      uucp: ..!{uunet,hp4nl}!mh.nl!vhy
Doesburgweg 7, 2803 PL Gouda, The Netherlands phone/fax: +31 1820 62944/62500