Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!samsung!emory!att!cbnewsl!mgh1
From: mgh1@cbnewsl.att.com (matthew.g.hetman)
Newsgroups: comp.sys.amiga
Subject: Re: UUCP 1.03D and HST 14400
Message-ID: <1990May31.020955.9460@cbnewsl.att.com>
Date: 31 May 90 02:09:55 GMT
References: <4374.AA4374@sosaria>
Distribution: comp
Organization: AT&T Bell Laboratories
Lines: 19

> > I'm having difficulties getting Matt Dillon's UUCP 1.03D to work with an
> > HST 14400 modem.  The modem calls out just fine, but doesn't connect properly.
> > at 1200 and 2400 baud.  Has anyone managed to get an HST to work with this
> > software?

I has a similar problem with my HST when I first tried it. I could connect to
UNIX but the modem on the UNIX side would just sit there. It turned out to
be a problem with the HST modem settings. I had to disable the error control
check with the HST command "at&m0". This solved my problem very quickly. Try
it out, it may help out.....



  _______       ______                                       Matthew G. Hetman
  (  /  )        / /          /   /     ____                 AT&T Bell Labs
 /  /  /   __   / /          /---/       /   ____  __   __   (201) 386-7259
/  /  (___/-/__/ /____      /   (___()__/____///__/-/__/ /_  attbl!whscad1!mgh
							     or
							     attbl!whuts!mgh1