Path: utzoo!utgpu!news-server.csri.toronto.edu!mailrus!ames!ucsd!usc!cs.utexas.edu!uunet!snorkelwacker!paperboy!husc6!husc4!joltes
From: joltes@husc4.HARVARD.EDU (Richard Joltes)
Newsgroups: comp.sys.dec
Subject: LAT printing on ULTRIX
Message-ID: <3145@husc6.harvard.edu>
Date: 6 Jun 90 18:07:14 GMT
Sender: news@husc6.harvard.edu
Reply-To: joltes@husc4.UUCP (Richard Joltes)
Organization: Harvard University Science Center   Cambridge, MA
Lines: 24

Hi all,

I'm looking for anyone who's successfully (or not) connected a serial printer
to an ULTRIX system via LAT.  We've tried RTFM'ing the Management guides under
"Printing" but the best we can get is a tenuous connect (shows up on a SHOW
USERS on the Term Server but no output).  I know the serial line's correct
because a TEST PORT command produces readable output on the printer.

Anything special to do with ULTRIX?

Any special parameters that need to be set on the Term Server?

Help!

BTW, we're running ULTRIX 3.1a (soon to be 3.1c) and using a XYPLEX MaxServer
5000 with their v1.1 software.

Thanks in advance,

Dick Joltes				joltes@husc4.harvard.edu
Mgr. of Hardware & Facilities
Harvard University Science Center

Virtual .sig appears here