Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!swrinde!zaphod.mps.ohio-state.edu!samsung!umich!umeecs!shim From: shim@zip.eecs.umich.edu (Sam Shim) Newsgroups: comp.sys.ibm.pc Subject: Re: QEMM5 & DV 2.26 Keywords: pckwik cache qemm desqview dv Message-ID: <2540@zipeecs.umich.edu> Date: 6 Jun 90 17:19:58 GMT References: <3166@bnr-rsc.UUCP> Reply-To: shim@eecs.umich.edu (Sam Shim) Organization: University of Michigan EECS Dept., Ann Arbor, MI Lines: 36 In article <3166@bnr-rsc.UUCP> mlord@bnr-rsc.UUCP (Mark Lord) writes: >Well, the QEMM-386 upgrade has arrived, WITH manifest, even though >the update offer claimed no luck after May 1/90 (or whenever). > >QUESTION: > > Does anyone have QEMM5 & DV2.26 working with Super PC-Kwik ?? > >On my system, DV crashes as soon as it tries to "swap" to disk. >The previous edition of DV-386 did not crash under these conditions. > >The new stuff works perfectly ok with the PC-TOOLS pc-cache (5.5). > >Manifest is suprisingly useful! It works fine with me. What version of Super PC-Kwik are you using? The latest version is 3.57 (or around there). If you don't have the latest version, call Multisoft and get it. The latest version also runs with Windows 3.0 (not that it matters but some other people out might be interested in that fact.). I would not recommend running Desqview 386 and PC-cache. PC-cache is not designed to and does not run well under with Desqview. I've had my drives corrupted twice by it. There was a big thread about Desqview and PC-cache on Compuserve a while back, and a lot of people had their files corrupted by that combination. Just a warning. ----------------------------------------------------------------------------- | Sam Shim | "I didn't do it... | | EECS Departmental Computing Organization | It wasn't me... | | University of Michigan | Nobody saw me do it... | | Ann Arbor, MI 48109 | Nobody can prove a thing..." | | internet: shim@eecs.umich.edu | - Bart Simpson | -----------------------------------------------------------------------------