Path: utzoo!attcan!uunet!snorkelwacker!ai-lab!mikec From: mikec@wheaties.ai.mit.edu (Mike E. Ciholas) Newsgroups: comp.sys.mac.programmer Subject: Re: MacRecorder, again Message-ID: <8926@wheat-chex.ai.mit.edu> Date: 8 Jun 90 21:15:22 GMT References: Reply-To: mikec@wheat-chex.ai.mit.edu (Mike E. Ciholas) Organization: MIT Artificial Intelligence Laboratory Lines: 23 In article mm5l+@andrew.cmu.edu (Matthew Mashyna) writes: >I know this has been beaten to death before but, can anyone point me >to some source code for controlling the recorder ? I want to include >some sound capabilities in an application. >Matt Mashyna get the file info-mac/sound/program/sid.hqx from sumex-aim.stanford.edu by anonymous ftp. It has C source code for controlling (actually, its just "listening") a SID or MacRecorder (they have the same interface). The basics are: Turn on the transmitters for the serial port so the recorder can get power. Setup the serial input for external clock divide by one. Then, just sit back and soak in bytes. Mike Ciholas email: mikec@ai.mit.edu snail: 289 Highland Ave, #108/Somerville, MA 02144 phone: (617) 623-3563 air: N1909C, 1954 Cessna 170B