Path: utzoo!utgpu!news-server.csri.toronto.edu!rutgers!cs.utexas.edu!sdd.hp.com!ucsd!ucbvax!AERO4.LARC.NASA.GOV!blbates
From: blbates@AERO4.LARC.NASA.GOV ("Brent L. Bates AAD/TAB MS361 x42854")
Newsgroups: comp.sys.sgi
Subject: Re:  serial ports - connect other devices.....
Message-ID: <9006041200.AA00406@aero4.larc.nasa.gov>
Date: 4 Jun 90 12:00:04 GMT
Sender: daemon@ucbvax.BERKELEY.EDU
Organization: The Internet
Lines: 13


   On our 3130 the ports are labelled 1 thru 4, however, these correspond
to ttyd[0-3].  I don't know if SGI also misslabels the ports on the 4D
or not, but that could be the problem.  Also you might want to use ttyf?
they provide hardware handshaking.
--

	Brent L. Bates
	NASA-Langley Research Center
	M.S. 361
	Hampton, Virginia  23665-5225
	(804) 864-2854
	E-mail: blbates@aero4.larc.nasa.gov or blbates@aero2.larc.nasa.gov