Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!uunet!philmtl!philabs!crpmks!garyb From: garyb@crpmks.UUCP (Gary Blumenstein) Newsgroups: comp.unix.i386 Subject: Re: i486, ISC 2.0.2, VPIX, Orchid Prodesigner Plus = bad news Summary: STB VGA EM/16 Works fine Message-ID: <1187@crpmks.UUCP> Date: 7 Jun 90 13:23:59 GMT References: <9006032202.aa29658@PARIS.ICS.UCI.EDU> Reply-To: garyb@crpmks.UUCP (Gary Blumenstein) Organization: Ciba-Geigy Corporation Lines: 34 In article <9006032202.aa29658@PARIS.ICS.UCI.EDU> baxter@zola.ICS.UCI.EDU (Ira Baxter) writes: >I wanted VPIX VGA, plus 1024x768 under X11. I tried this combination, as I >had feedback from one soul that indicated this works. > >VPIX + Prodesigner locks up in funny ways; once you lock up the >/dev/console, you have to re-boot. >[..] >In the meantime... I'm considering returning the Orchid board. >Anybody used the STB VGA board like this? >[..] any remarks? I'm not exactly sure whether you mean you're trying to do VGA from within X, for instance I use the STB VGA EM/16 (16 bit, 512K) board and it works fine under running a 1024x768 X server on one multiscreen, with a 1024x768 VGA session under VP/ix running in another multiscreen. I can switch between the two screens all day long without any problems. Aside: VP/ix also runs in text mode in an xpcterm window under X. It also works from a different X server (X terminal) over the ethernet. Not too shabby! Summary: I love the STB board. The next step up would be an intelligent graphics setup. Something like a TI84020 with oodles of memory and it's own X server. I selected STB for three reasons; 1024x768, I could afford it, and because a posting last year said the software engineer who wrote the VGA X server for ISC uses one. -- Gary M. Blumenstein, UNIX Network Administrator // CIBA-GEIGY Corporation USA ----------------------------------------------------------------------------- Phone (914) 347-4700 7 Skyline Drive, Hawthorne, NY 10532 FAX (914) 347-5687 UUCP ...uunet!philabs!crpmks!garyb