Path: utzoo!attcan!uunet!zephyr.ens.tek.com!gvgpsa!gold!viper.gvg.tek.com!davew
From: davew@viper.gvg.tek.com (Dave White)
Newsgroups: comp.unix.ultrix
Subject: Re: Connecting to DECserver 100
Message-ID: <1063@gold.GVG.TEK.COM>
Date: 8 Jun 90 16:32:01 GMT
References: <137@motto.UUCP>
Sender: news@gold.GVG.TEK.COM
Reply-To: davew@viper.gvg.tek.com (Dave White)
Organization: Grass Valley Group
Lines: 19


> 
> I would like to communicate through a group of DECserver 100 ports from
> Ultrix V2.0-1 running on a micro-Vax II. I have not been able to find
> documentation indicating how a program initiates a connection to a
> specific terminal server port but I know that lpc can do it. Does
> anyone know how this is done? Have a sample?

I don't know about the V2.0-1 manuals since I don't have that doc set
around anymore,
but the V3.0/3.1 manual "Guide to Ethernet Communications Servers" has
an example program for an LAT host initiated connection (reverse lat).  You
might check in /usr/examples/lat/dial.c to see if this was included in
the V2.0 software.
----
Dave White	Grass Valley Group, Inc.   VOICE: +1 916.478.3052
P.O. Box 1114  	Grass Valley, CA  95945    FAX: +1 916.478.3887
Internet: davew@gvgpsa.gvg.tek.com 
UUCP: ...!tektronix!gvgpsa.gvg.tek.com!davew