Path: utzoo!utgpu!news-server.csri.toronto.edu!rutgers!netnews.upenn.edu!vax1.cc.lehigh.edu!cert.sei.cmu.edu!krvw From: GLWARNER@SAMFORD.BITNET (The.Gar) Newsgroups: comp.virus Subject: clearing ps/2 pw, faces on screen (PC) Message-ID: <0001.9006051151.AA17014@ubu.cert.sei.cmu.edu> Date: 1 Jun 90 16:02:55 GMT Sender: Virus Discussion List Lines: 21 Approved: krvw@sei.cmu.edu Dimitri - I can't help you with your problem, other than to tell you that IBM's recommended procedure for a forgotten password USED TO BE to remove the battery from the motherboard (I had an original PS/2 70.) THIS HAS CHANGED, however, and they now have a "trick" that let's you quickly clear the password. What one is now able to do, is unplug the speaker connector from the bus adapter card, and plug it in in the opposite direction. PRESTO! Your password is cleared! I REALLY doubt this would work on non-IBM hardware, though. Joest@DD0RUD81 - What you describe sounds very much like a practical joke program that I have seen a dozen times around campus. It is called FACES, and is quite small (about 3K I believe.) What I would ask you to check is whether your program does in fact set the KEYBOARD=GR? If it does not I would suggest that someone modified the FACES program to make it smaller and has simply renamed it and copied it over your other program. Later THE GAR