Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!tut.cis.ohio-state.edu!snorkelwacker!spdcc!mirror!ssi3b1!pselver
From: pselver@ssi3b1.zone1.com (Peter Selverstone)
Newsgroups: comp.sys.amiga.hardware
Subject: Re: flickerfixer
Message-ID: <1990Jun12.185301.19232@ssi3b1.zone1.com>
Date: 12 Jun 90 18:53:01 GMT
References: <7755@ur-cc.UUCP>
Reply-To: pselver@ssi3b1.UUCP (Peter Selverstone)
Organization: Spy Pond Systems
Lines: 15

In article <7755@ur-cc.UUCP> gsgi_cif@troi.cc.rochester.edu (Gregory Gibson) writes:
>
>My flicker fixer worked fine for a while...  now the screen has glitches...
>it doesn't flicker but it has these glitchy things that wiggle one line of
>characters... any ideas?
>
Go throught the phasing adjustment procedure in the manual using the
test pattern picture that is supplied with the board.  If that doesn't
cure it, then call MicroWay tech support at (508) 746-7341.  I'm
sure they will be able to help you.
-- 
Peter Selverstone ...{mit-eddie,pyramid,datacube}!mirror!ssi3b1!pselver
Spy Pond Systems  pselver@ssi3b1.zone1.com
Arlington, MA     BIX:pselverstone   PLINK:pselverst   CIS:72527,2652