Path: utzoo!utgpu!watserv1!watmath!att!bellcore!rutgers!cs.utexas.edu!uunet!nfsun!eklektik!eric
From: eric@eklektik.UUCP (/dev/tty000)
Newsgroups: comp.sys.amiga.hardware
Subject: C. Ltd A1000 SCSI interface passthrough
Message-ID: <3646@eklektik.UUCP>
Date: 14 Jun 90 14:29:01 GMT
Reply-To: eric@eklektik.UUCP (/dev/tty000)
Organization: Computers, Gerbils, and Games in the Basement, Pgh, PA
Lines: 17


The C. Ltd. SCSI interface for the A1000 passes the bus, but it doesn't 
provide the same kind of connector.  (i.e., it ends in a female connector 
instead of a male connector.)  I remember seeing someone write about an
adapter that was required to use the passthrough.  What kind of adapter is
it, and where is it available?  Is it simply a piece of PC-board with
parallel traces on both sides?  If so, it shouldn't be too hard to come
up with one.

Please respond via email if possible.

Thanks for any help.

-- 
---------------------------------------
Eric Kennedy                    eric@eklektik.pgh.pa.us
(formerly ejkst@pitt.UUCP)      ...pitt!idis!eklektik!eric