Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!uunet!van-bc!ubc-cs!alberta!bode!kees
From: kees@bode.ee.ualberta.ca (Kees denHartigh,SYS ADMIN,5421-EB544)
Newsgroups: comp.sys.hp
Subject: HELP with gettydefs and modem
Message-ID: <62@bode.ee.ualberta.ca>
Date: 12 Jun 90 23:22:55 GMT
Reply-To: kees@bode.ee.ualberta.ca (Kees denHartigh)
Distribution: na
Organization: University of Alberta Electrical Engineering
Lines: 55

I am at my wits end with my hayes compatable modem  and my serial
line not syncing up at the proper incoming call baud rate.
I have an hp9000-835 sys running hp-ux 7.0. The line was set up
by sam for incoming and outgoing calls.
 
this is my gettydefs definition

2400# B2400 OPOST ONLCR # B2400 ICRNL IXON IXANY ONLCR OPOST ECHOK ECHO ICANON ISIG INPCK ISTRIP HUPCL BRKINT #2400login: #PH

PH# B1200 OPOST ONLCR # B1200 ICRNL IXON IXANY ONLCR OPOST ECHOK ECHO ICANON ISIG INPCK ISTRIP HUPCL BRKINT CLOCAL #1200login: #PH3

PH3# B300 OPOST ONLCR # B300 ICRNL IXON IXANY ONLCR OPOST ECHOK ECHO ICANON ISIG INPCK ISTRIP HUPCL BRKINT CLOCAL #300login: #2400

this is my inittab entry

c5:2:respawn:/usr/lib/uucp/uugetty -h -r ttyd0p5 2400 vt100

this is my ttytype entry

vt100 tty0p5 #Modem

this is my /usr/lib/uucp/Devices

ACU cul0p5 cua0p5 1200 hayes
ACU cul0p5 cua0p5 2400 hayes

The Problem comes when a person dials in at 1200 baud
If the modem was at high speed (2400) and a users dials in at 1200
the modem answers at 1200 and a simple <cr> will set the line at 1200
after that person logs out and again trys to dial in at 1200 absolutely
nothing the user types will give them a getty prompt.
If I reset the modem or a call goes out (uucp) or otherwise all
seems well and another user can dial in at 1200 and a <cr> will
give them a prompt.
Also if a user has dialed in at 1200 and logs out.
Then someone else comes in at 2400 I get the similar dead screen syndrome 

I have tryed the round robin eg. in the gettydefs section of the manual
eg.

2400# B2400 HUPCL # B2400 SANE IXANY IXANY TAB3 #2400login: #PH

PH# B1200 HUPCL # B1200 SANE IXANY IXANY TAB3 #1200login: #PH3

PH3# B300 HUPCL # B300 SANE IXANY IXANY TAB3 #1200login: #2400

but i get no joy
Has anyone run into a similar problem or have a fix for me.
Thanks in advance
				a frustrated admin.
________________________________________________________________
Kees denHartigh                         kees@bode.ee.ualberta.ca 
Electrical Engineering Digital Labs     alberta!bode!kees
University of Alberta 238 Civil Elect   Voice (403)492-5421
Edmonton, Alberta Canada                Fax   (403)492-1811