Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!swrinde!zaphod.mps.ohio-state.edu!rpi!uupsi!sunic!iclswe!lars
From: lars@iclswe.icl.se (Lars Tunkrans)
Newsgroups: comp.sys.ibm.pc
Subject: Naive DESQVIEW configuration question.
Message-ID: <1990Jun13.220246.958@iclswe.icl.se>
Date: 13 Jun 90 22:02:46 GMT
Reply-To: lars@iclswe.icl.se (Lars Tunkrans)
Organization: ICL Data AB  194 85 Upplands Vasby  Sweden
Lines: 27

I am running what I belive is an ACER 386SX system with one MB store. I
will upgrade this to 4 Mb.  

I am runnig QEMM 5 and DV 2.26 with Manifest.

I got two problems:

1.  It is impossible to control Manifest. Only if I load the
Keyboard.sys and Mouse.sys in the same region in High RAM it runs but
then the system crashes when I exit from Manifest.

2.  I am using a vt220 terminal emulator over Ethernet with the BICC
lanboard installed at adress D000 IRQ 3. I am Using the ISOLAN driver to
this board. The emulator uses a TSR to do help functions and so on.
after I loaded QEMM its almost impossible to wake up the TSR. Only If
you press all keys on keyboard simultaneously for awhile it wakes up.

Any advice ?   please !

PS:   I normally play with unix.   DS:


-- 
Lars Tunkrans  Phone +46 (0)76096368. |  The ICL DRS6000 SPARC system is still  
      DRS Systems Support.            |  the only off the shelf deliverable 
UUCP: uunet!mcsun!sunic!iclswe!lars   |  Unix System V Release 4.0 system.
DOMAIN Address : lars@iclswe.icl.se   |