Path: utzoo!attcan!uunet!mailrus!ncar!dinl!noren
From: noren@dinl.uucp (Charles Noren)
Newsgroups: comp.sys.ibm.pc.programmer
Subject: Re: Turbo Products are shipping
Message-ID: <1635@dinl.mmc.UUCP>
Date: 11 Jun 90 14:10:01 GMT
References: <YaE5zGS00UoaM7lURx@andrew.cmu.edu>
Organization: Martin Marietta I&CS, Denver, CO.
Lines: 30

<JACOBS.90Jun10133421@cmos.cs.utah.edu>
Sender: 
Reply-To: noren@dinl.UUCP (Charles Noren)
Followup-To: 
Distribution: 
Organization: Martin Marietta I&CS, Denver CO.
Keywords: 

In article <JACOBS.90Jun10133421@cmos.cs.utah.edu> jacobs@cs.utah.edu (Steven R. Jacobs) writes:
>"To use Turbo Debugger with Borland products, you must have Turbo
>Pascal 5.0 or later, Turbo C 2.0, Turbo C++, or Turbo Assembler 1.0
>or later."
>
>The "features" list explicitly mentions support for Turbo Pascal 5.5,
>which is a fairly recent addition to the Borland line.

A word of caution.  According to one person I talked with at Borland
on their support line, the latest Turbo Debugger (TD) will not work
with Turbo Pascal (TP) 5.5.  Appearently the TD shiped with TC 2.0
will work.  The moral, if you have TP 5.5, don't throw away your old
copy of TD (or if you recently bought a copy of TP only and have TC
professional, don't throw away the old TD) until you at least verify
yourself or from Borland the new TD will work with your TP.

-- 
Chuck Noren
NET:     ncar!dinl!noren
US-MAIL: Martin Marietta I&CS, MS XL8058, P.O. Box 1260,
         Denver, CO 80201-1260
Phone:   (303) 971-7930