Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!samsung!usc!apple!mips!daver!bungi.com!news
From: des@musashi.wpd.sgi.com (Des Young)
Newsgroups: comp.sys.nsc.32k
Subject: Re: Hardware Problems
Message-ID: <9006130103.AA21244@musashi.wpd.sgi.com>
Date: 13 Jun 90 01:03:51 GMT
Sender: news@daver.bungi.com
Lines: 9
Approved: news@daver.bungi.com

Hmm,
  this is beginning to look like shorted pins/wires. May pay to check
adjacent wires are not shorted, say adjacent pins on the PAL. A
solder bridge between two traces can do it. Give the PCB a good scrub
with a stiff brush on the back.
Des.
trademarks abound, usual disclaimers apply, opinions are mine
des@pei.com	Des Young	(415) 335-1888
		Protocol Engines Inc., Mountain View, CA