Xref: utzoo comp.sys.mac.comm:481 comp.protocols.appletalk:3858 comp.dcom.lans:5303
Path: utzoo!attcan!uunet!tut.cis.ohio-state.edu!mailrus!cs.utexas.edu!ut-emx!xdaa374
From: xdaa374@ut-emx.UUCP (William T. Douglass)
Newsgroups: comp.sys.mac.comm,comp.protocols.appletalk,comp.dcom.lans
Subject: Connecting AppleTalk nets together
Message-ID: <32796@ut-emx.UUCP>
Date: 28 Jun 90 19:55:11 GMT
Organization: The University of Texas at Austin, Austin, Texas
Lines: 17

I am looking for advise on connecting AppleTalk ethernet LANS from 
separate buildings together.  I have 2 ethernets hooked up, and want to
tie them into 1 agency-wide internet.  This probably means T1 links
between buildings.

Could some of you share your wisdom with me on this?  I'd like to
find out what equipment I will need to connect each net to the T1 circuit,
and what brands of hardware/software you have used and/or recommend.

Thanks for any and all assistance.  Please email me, as I don't read the
newsgroups as much as I'd like to these days.

-- 
Bill Douglass, TCADA

"I dreamed I was to take a test,
 in a Dairy Queen, on another planet."      L. Anderson