Path: utzoo!utgpu!news-server.csri.toronto.edu!rutgers!cs.utexas.edu!uunet!stephsf!wengland
From: wengland@stephsf.stephsf.com (Bill England)
Newsgroups: comp.mail.uucp
Subject: A small Telebit problem
Message-ID: <173@stephsf.stephsf.com>
Date: 30 Jun 90 23:43:15 GMT
Distribution: usa
Organization: Stephen Software Systems, Inc., Tacoma WA
Lines: 25


   This is not a uucp problem but a modem problem.  I'd taken for granted
   my reliable connections with a Hayes modem.  This new Telebit finally
   will connect at both 1200-2400 and 19200 with the addition of two
   device names in the devices file.  BUT, I can't get it to allow 1200
   baud modems to dial in.   It's FRUSTRATING.

   I don't know mabey it's broken or something.  It always throws PEP 
   signals, first thing, at calling modems, if S90=0 or S90=1.  S90=2 
   will give a tone on answer, and then it will throw a PEP screwing 
   everything up.

   I just want the PEP signals at the end of the answer sequence.  
   Thats all.   Not a major request really. :-) 

   ?????  H e l p

 +--------
 |  Bill England
 |  Stephen Software Systems, Inc.,   Tacoma Wa.
 |  wengland@stephsf.com              +1 206 564 2122
 |
  * *      H -> He +24Mev
 * * * ... Oooo, we're having so much fun making itty bitty suns *
  * *