Path: utzoo!attcan!uunet!stephsf!wengland
From: wengland@stephsf.stephsf.com (Bill England)
Newsgroups: comp.mail.uucp
Subject: Re: A small Telebit problem
Message-ID: <176@stephsf.stephsf.com>
Date: 2 Jul 90 21:33:57 GMT
References: <173@stephsf.stephsf.com> <HZ6LL2w162w@halcyon.wa.com> <1422.268e1a89@dcs.simpact.com>
Reply-To: wengland@stephsf.UUCP (Bill England)
Organization: Stephen Software Systems, Inc., Tacoma WA
Lines: 28

In article <1422.268e1a89@dcs.simpact.com> jeh@dcs.simpact.com writes:
>In article <HZ6LL2w162w@halcyon.wa.com>, ralphs@halcyon.wa.com (Ralph Sims)
> writes:
>> wengland@stephsf.stephsf.com (Bill England) writes:
>>>    I just want the PEP signals at the end of the answer sequence.
>>>    Thats all.   Not a major request really. :-)
>> 

   Thanks for your responses.  I could not understand why the modem
would not configure properly.  Sometimes it would work and then it 
would not.  Also after a failed uucp call out the DTR light would
not come back on, sometimes.

  It appears that the com ports are dropping out some chars when 
uucp tries to configure the modem during call out.   I'm going to
try to get FAS running.   I just recieved a copy of the source 
this morning.

            ( If I disappear, I've self destructed. )

 +--------
 |  Bill England
 |  Stephen Software Systems, Inc.,   Tacoma Wa.
 |  wengland@stephsf.com              +1 206 564 2122
 |
  * *      H -> He +24Mev
 * * * ... Oooo, we're having so much fun making itty bitty suns *
  * *