Path: utzoo!attcan!uunet!zephyr.ens.tek.com!tektronix!nosun!qiclab!m2xenix!quagga!ucthpx!undeed!fakefeed!news
From: psuvm!cjw106@psuvax1.cs.psu.edu (That Mean Guy Chas)
Newsgroups: comp.protocols.tcp-ip.ibmpc
Subject: NCSA Telnet and Proteon-10 Network
Message-ID: <900627172454.fidomsg.705.msg@f4.n494.z5.fidonet.org>
Date: 25 Jun 90 22:03:05 GMT
Sender: guest@ucthpx ()
Lines: 14
Approved: news@Daisy.EE.UND.AC.ZA (rlist 1.10)
To:   pcip@udel.edu
X-Gatewayed: by Daisy.EE.UND.AC.ZA (rlist 1.10); Thu, 28 Jun 90 16:52:27 GMT

Please forgive my possible ignorance but I would like to use the NCSA Telnet
package on a Proteon-10 network.  We have about 15 Model 30 PS/2's linked
together with the Proteon software.  We are currently using FTP Software's
TNVT.  I dont know what kind of card is connecting the network to the
actual internet (but I could find out).  I cannot seem to find the correct
driver to get NCSA Telnet to operate.  Can anyone help?
  
--chas iii
  
--chas iii
charles j williams iii  %%   Electrical Engineer   %%  "Power corrupts, but we
cjw106@psuvm.psu.edu    %%  Penn State University  %%   need electricity."
Disclaimer: The information presented herein represents the opinion of the
            author, not the policies of the Pennsylvania State University.