Path: utzoo!attcan!uunet!munnari.oz.au!uhccux!donald.uhcc.Hawaii.Edu!olson
From: olson@donald.uhcc.Hawaii.Edu (Todd Olson)
Newsgroups: comp.sys.amiga.hardware
Subject: Re: Motherboard revision differences
Message-ID: <8439@uhccux.uhcc.Hawaii.Edu>
Date: 28 Jun 90 19:09:06 GMT
References: <4060@uqcspe.cs.uq.oz.au> <12955@cbmvax.commodore.com> <[2688b902:593.2]comp.sys.amiga.hardware;1@wcbcs>
Sender: news@uhccux.uhcc.Hawaii.Edu
Organization: University of Hawaii
Lines: 23

In article <[2688b902:593.2]comp.sys.amiga.hardware;1@wcbcs> akcs.clemon@wcbcs (Craig Lemon) writes:
>   I'm also interested in the question and answer previously stated.  I have
>heard of the 2620 and 2630 not working on some 4.x motherboards due to some
>sort of bus capacitors or some such thing.  I'm particularly interested in
>4.2.  If the only difference is SUPPOSED to be the capacity of each DRAM,
>why do the _Commodore Built_ accelerators fail to function (as I said, this
>is what I've been told)?

	My 4.3 with a 1-meg Agnus works with my 2630..sorta.
Upon guru the screen will go blank, no guru message, just a blank screen,
when I then three finger salute, I  get the guru, then one more three
finger salute to get back to working order.  This is a slight pain at
times, but I can live with it unless there is a quick easy fix.

	So does anybody have any suggestions?

						Todd

--
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
   olson@uhccux.uhcc.hawaii.edu     |   "Life SUCKS, but death doesn't    
   olson@uhunix.uhcc.hawaii.edu     |   put out at all."                  
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-