Path: utzoo!utgpu!news-server.csri.toronto.edu!clyde.concordia.ca!uunet!tronsbox!bleys From: bleys@tronsbox.xei.com (Bill Cavanaugh) Newsgroups: comp.sys.amiga.tech Subject: EXECUTE errors Message-ID: <268f7858-75c.1comp.sys.amiga.tech-1@tronsbox.xei.com> Date: 2 Jul 90 22:00:29 GMT References: Lines: 21 >I have never used the "execute" command before and I'm having some >problmes... I am trying a new boot process where a short startup- >sequence file EXECUTEs another file on the hard disk. I get the >following error: > >EXECUTE: No K directive If you start your script file with .bra { .ket } your problems will magically vanish. I'm sure someone out here will have a technical explanation why, but I had the same problem, and this was the solution... /******************************************************************** * All of the above copyright by the below. * * Bill Cavanaugh uunet!tronsbox!bleys * * "You can only be young once, but you can be immature forever." * * Larry Anderson * ********************************************************************/