Path: utzoo!attcan!uunet!snorkelwacker!usc!cs.utexas.edu!rutgers!cbmvax!cbmehq!cbmger!peterk
From: peterk@cbmger.UUCP (Peter Kittel GERMANY)
Newsgroups: comp.sys.amiga.tech
Subject: Re: EXECUTE errors
Message-ID: <253@cbmger.UUCP>
Date: 3 Jul 90 07:59:21 GMT
References: <alfredo.7122@ajahnv.lonestar.org>
Reply-To: peterk@cbmger.UUCP (Peter Kittel GERMANY)
Organization: Commodore Bueromaschinen GmbH, West Germany
Lines: 18

In article <alfredo.7122@ajahnv.lonestar.org> alfredo@ajahnv.lonestar.org (Alfredo Jahn V) writes:
>I have never used the "execute" command before and I'm having some
>problmes...  I am trying a new boot process where a short startup-
>sequence file EXECUTEs another file on the hard disk.  I get the
>following error:
>
>EXECUTE: No K directive
>DH0:c/execute failed returncode 20

For me it sounds like you forgot to provide the correct path for your
script file in the execute command. The error message said execute
failed but it doesn't say that something _inside_ the script failed.
The K directive doesn't have anything to do with this message.


-- 
Best regards, Dr. Peter Kittel      //     E-Mail to 
Commodore Frankfurt, Germany      \X/      rutgers!cbmvax!cbmger!peterk