Path: utzoo!attcan!uunet!cs.utexas.edu!usc!apple!sun-barr!newstop!texsun!csccat!egsner!whitwiz!danny From: danny@whitwiz.lonestar.org (Danny White) Newsgroups: comp.sys.amiga.tech Subject: Re: UUCP 1.06 and the A3000 Message-ID: Date: 3 Jul 90 13:20:16 GMT References: <1414@nyx.UUCP> Lines: 19 >In article <1414@nyx.UUCP> bscott@nyx.UUCP (Ben Scott) writes: > >My own UUCP node is having some severe problems as well. It started out I have been running UUCP 1.06 for a couple of months now and have hadd no problems with it. (I am running it on an a500 with a 590 but no super Agnus.) I would suggest that you do restore from the backups and make sure that you have your stack size set to a large number (such as 15000) I had problems with 1.06 until I set my stack. (NOTE: this may not be a problem but I did get things to settle down by setting my stack) Also, you might want to check out your modem and phone lines. -- UUCP: ...!texbell!whitwiz!danny SNAIL:Danny White 1429 Glacier Dr. INTERNET: danny@whitwiz.lonestar.org Plano, TX 75023 ========================================================================== "In order to make an apple pie from scratch, you must first create the universe." -- Carl Sagan, Cosmos