Path: utzoo!attcan!uunet!aplcen!samsung!cs.utexas.edu!hellgate.utah.edu!helios.ee.lbl.gov!nosc!crash!pro-graphics.cts.com!bobl
From: bobl@pro-graphics.cts.com (System Administrator)
Newsgroups: comp.sys.apple2
Subject: Modem/Serial ports to 38.4k baud or >
Message-ID: <3374@crash.cts.com>
Date: 1 Jul 90 21:36:06 GMT
Sender: root@crash.cts.com
Lines: 19
X-Local-Date: 1 Jul 90 14:36:06 PDT

Is there a CDA or something out there that will allow the GS modem port to go
beyond the 19.2k baud speed?  If so, where is it or can someone binscii it and
mail it to me?  I just purchased a Hayes Ultra on the SysOp plan and with V.42
bis, it will transfer at an effective 38.4k baud.  Too bad the lousy modem
port will only configure out to 19.2.  I hear there is a CDA available that
will bypass the modem port firmware, is this true?

I'm beginning to feel that I'm working on a computer that has fallen behind
the times here..I hope someone can help before I have to pack this GS in and
go with something that can support the current technology...

-- Bob
________ Pro-Graphics BBS - It's better than a sharp stick in the eye! ________

InterNet: bobl@pro-graphics.cts.com          |  Pro-Graphics: 908/469-0049
    UUCP: ..crash!pro-graphics!bobl          |        CServe: 70347,2344
ARPA/DDN: ..crash!pro-graphics!bobl@nosc.mil |  Amer. Online: Graphics3D
___________                                                        ____________
            Raven Enterprises - 25 Raven Ave. Piscataway, NJ 08854