Path: utzoo!attcan!uunet!zephyr.ens.tek.com!uw-beaver!rice!cs.utexas.edu!swrinde!ucsd!ucbvax!pro-grouch.cts.com!rond
From: rond@pro-grouch.cts.com (Ron Dippold)
Newsgroups: comp.sys.apple2
Subject: Re: ProTERM
Message-ID: <2855.apple.net2@pro-grouch>
Date: 4 Jul 90 06:16:03 GMT
Sender: daemon@ucbvax.BERKELEY.EDU
Organization: The Internet
Lines: 18

In-Reply-To: message from Greg.Bear@samba.acs.unc.edu

> the codes, but does not change anything.  On the 80th column wrap, 
> according to other vt-100 terminals, when a letter appears in the 
> 80th column, the cursor will not move until the next character is sent. 
> V2.1 generates a new line, which messes up my usage of vi and reading 
 
Check your 2.1 docs....  The following commands (used in a macro) set VT100
stuff:
 
OP W+ or OP W-   Set wrap at col 80 on or off
OP K+ or OP K-   Set Keypad / Application  keypad
OP I+ op OP I-   Enable/disable inverse chars in VT-100 mode


UUCP: crash!pro-grouch!rond
ARPA: crash!pro-grouch!rond@nosc.mil
INET: rond@pro-grouch.cts.com